I’ve gotten behind on my blogging again (surprise). I finished a couple things recently that I just forgot to photograph. I also have some really old photos of things I’ve made that I’ve just never posted. I’m going to look back at the blog and compare it to my pictures and see what I could post that I haven’t yet. Hopefully I’ll get caught up on that in the next little while.
One thing that I did finish recently and managed to take pictures of was another self-binding receiving blanket. I used this tutorial again from Shannon Fabrics. I couldn’t remember the measurements that I had used for my first one that I was so happy with, so I picked new ones - I wasn’t as happy with the final dimensions/proportions, but it turned out fine. Looking back I see I wrote down the first dimension - apparently I didn’t remember that I did that either.
This time around I used minky for the middle section. I had never used minky before, but I had heard that it can be hard to work with so I did some googling. Some of the things I read that I took into consideration included the fact that minky does not need to be washed first because it won’t shrink, minky gets fluffs all over your workspace (and floor, and pants, etc.), and minky doesn’t always feed nicely through your machine so use a walking foot, or make sure it is on the bottom with your feed dogs (what I did).
I made this blanket for a coworker to give her godson. The parameters/directions I was given were monsters and blue. I think I did a good job meeting the criteria.
Again, I was really happy with how it turned out and have already bought more flannel to make another one.